Product Care - Table Tops

Natural Series Table Tops

Natural Series surfaces should be cleaned on a regular basis with mild soap and water and a sponge or soft cloth. If necessary, use a mild abrasive cleaner to release any embedded dirt. Rinse thoroughly with clean water.

Cast Table Tops

Clean with mild soap and water using a sponge or soft cloth. A clear liquid automotive wax may be applied 1-2 times a year to protect the finish.

Follow this process if the finish is scratched or chipped. First, sand the affected area lightly with fine steel wool or 400-600 grit sandpaper for better paint adhesion, then wipe it clean. Cover adjacent areas to avoid overspray and, holding the can 8-10 inches away from the area, apply thin coats of paint. Allow ample time to dry between coats. Do not try to cover the area in one coat; this may result in paint running or a change in the surface texture or the gloss of the finish. Paint may be sprayed on a separate surface and applied using a small artist brush, if desired.

If you are working with a finish that consists of multiple colors, you may want to practice on a piece of cardboard or other material first. Apply the base coat first and allow to dry 3-5 minutes. Then, apply light spurts of the top color until the desired look is achieved. If the area becomes too light after the finish has dried, apply a light dusting of the base coat.

If corrosion has occured on steel products, treat the area with Loctite® Extend Rust Neutralizer or Naval Jelly® Rust Dissolver following manufacturer's instructions. Then continue with the touch-up process described above.

Tip: Contact your dealer for touch-up paint. Always store your touch-up paint upside down to avoid the nozzle from becoming plugged.

Glass Table Tops

Clean glass regularly with a soft cloth and a solution of mild soap and water. If necessary, use a mild abrasive cleaner to release any embedded dirt. Rinse thoroughly with clean water.

Granite Table Tops

Clean granite regularly, with a soft cloth and a solution of mild soap and water. Follow with a rinse of clean water. If necessary, use a mild abrasive cleaner to release any embedded dirt. Rinse thoroughly with clean water.